Current Active Projects:
Lubrication with eco-friendly aqueous emulsion (Finalist in 2014 UoW staff Pitch)
Fluid dynamic phenomena affecting the liquid coating quality in the jet strippling line
Development of high efficiency modular wind power generator device (2nd Place in 2014 UoW staff Pitch)
Development of portable steady hydro current power generator device

Grants:
2013/2014 UoW UIC International Links Neutron Reflectometry Measurement of Aqueous Polymer Adsorption Characteristics(with K Tieu & H Zhu)
2014 UoW URC Small Grant, Tribology of Renewable Oil-in-Water Emulsions for Sustainable Green Manufacturing
2012 UoW URC Small Grant High Efficiency Micro-Wind Turbines Cluster for Urban Built Environment Power Generation
2011 ARC Discovery Lubrication Mechanics in Hot Strip Rolling (with K Tieu, H Zhu, C Lu)
2009 ARC LIEF A Universal Nano-Tribometer for Surface and Thin Film Characterisation (with K tieu et al.)
2009 UoW URC Small Grant Experimental and Theoretical Tribological Study of High Temperature Metallic Contacts
2008 ARC Discovery Tribological Contact of Work Roll in Hot Rolling (with K Tieu, H Zhu)
2007 UoW URC Small Grant Work Roll Wear Mechanics in Hot Strip Rolling (with H Zhu)
2006 UoW URC Small Grant Molecular and Atomic Dynamics in Lubrication Asperity Contacts
2004 ARC Discovery Contact Mechanics in Hot Strip Rolling (with K Tieu, Liu)
2002 UoW Small Grant Thermal Mixing in Journal Bearing
2001 UoW Small Grant Study of the Onset of Transition in Thin Lubricant Film Flow
2001 ARC Large Flow Mixing at Supply Pocket in Journal Bearing (K Tieu)
2001 UoW Small Grant Thermal Mixing in Lubricant Supply Groove of a Journal Bearing

Books:
2006 Komputasi Numerik Teori dan Aplikasi, ANDI Publisher ISBN 9797635805 (In Bahasa) [sample chapter]
2012 Teori dan Aplikasi Metode Elemen Hingga, ANDI Publisher ISBN 9789792931839 (In Bahasa) [sample chapter]

Journal Publications on Tribology:
Vo K D, Zhu H T, Tieu A K, Kosasih P B, FE Method to predict damage formation on curved track for various worn status of wheel/rail profiles, WEAR, 322-323 (2015), 61-75.

K. D. Vo, A. K. Tieu, H Zhu, B. Kosasih, A 3D dynamic model to investigate wheel-rail contact under high and low adhesion, International journal of mechanical sciences, vol. 85, pp 63-75, 2014.

X. Gao, Z. Jiang, D. Wei, B. Kosasih, S. Jiao, D. Chen, Dry Sliding wear behaviour of full pearlite obtained by cladding low carbon steel to hypoeutectoid steel, Advanced Materials Research Vol. 1017, 147-153, 2014

B. Lin, H. Zhu, A. Tieu, B. Kosasih, G. Triani, The Effect of molecular structure on the adsorption of PPO-PEO-PPO triblock copolymers on solid surfaces, material science Forum, Vols. 773-774 pp 670-677

Vo, K.D., Tieu, A.K., Zhu, H.T., Kosasih, P.B., A tool to estimate the wheel/rail contact and temperature rising under dry, wet and oily conditions,WIT Transactions on the Built Environment 135 (2014), 191-201.

O. Novareza, B. Kosasih, A.K. Tieu, H. Zhu, Tribological Performance of Aqueous Copolymers Solutions in Metallic Contact, Material Science Forum, Vols. 773-774 pp 678-686

X. Zheng, H. Zhu, A.K. Tieu, B. Kosasih, Roughness and Lubricant Effect on 3D Atomic Asperity Contact, Tribology Letters 53 (2014), 215-223.

X. Zheng, H. Zhu, A.K. Tieu, P.B. Kosasih, A molecular dynamics simulation of 3D rough lubricated contact, tribology international,67, pp.217-221, 2013

Gao, X.J. , Jiang, Z.Y., Wei, D.B., Kosasih, B., Jiao, S.H, Chen, D.F,   Dry sliding wear behaviour of full pearlite obtained by cladding low carbon steel to hypoeutectoid steel , Advanced Materials Research, 1017 (2014), 147-153.

P.B. Kosasih, O. Novareza, A.K. Tieu, H.T. Zhu, Friction and Anti-Wear Property of Aqueous Tri-Block Copolymer Solutions in Metal Forming, International Journal of Surface Science and Engineering ,Vol 8, No 2/3, 2014, 109-123.

B. Lin, A.K. Tieu, H. Zhu, B. Kosasih, O. Novareza, G. triani, Tribological performance of aqueous copolymer lubricant in loaded contact with Si and coated Ti film, Wear, Vol.302,No 1-2, pp. 1010-1016, 2013.

X. Zheng, H. Zhu, B. Kosasih, A.K. Tieu, A molecular dynamics simulation of boundary lubrication: the effect of n-alkanes chain length and normal load, Wear,301, 1-2, pp. 62-69,2013.

Q. Zhu, H. Zhu, A.K. Tieu, P.B. Kosasih, C. Kong, A Simulation of Wear Behaviour of High Speed Steel Hot Rolls by Means of High Temperature Pin-on-Disc Tests, Wear, Vol. 302, No. 1-2, pp. 1310-1318, 2013.

P.B. Kosasih, A.K.Tieu, H. Zhu, A CFD Study of Lubricant Flow with Oil Droplets in Rolling Inlet Zone, Computational Fluid Dynamics Journal, v 17, n 1, 2008, 42-51.

P.B. Kosasih, A.K. Tieu, Mixed Film Lubrication of Strip Rolling Using O/W Emulsions, Tribology International, Tribology International, v 40, n 5, May, 2007, 709-716.

A.K. Tieu , P.B. Kosasih, Experimental and Numerical Investigation of O/W Emulsion Lubricated Strip Rolling, Tribology Letters, v 25, n 1, January, 2007, 23-32.

P.B. Kosasih, A.K. Tieu, A. Godbole, A Thermal Analysis of Strip-rolling in Mixed-Film Lubrication with O/W Emulsions, Tribology International, 39, 2006, 1591-1600.

P.B. Kosasih, A.K. Tieu, An Investigation into The Thermal Mixing in Journal Bearings, Proc. Instn. Mech. Engrs. Part J, J. Engineering Tribology, 218, J5, 379-389, 2004.

A.K. Tieu, Y.J. Liu, P.B. Kosasih, Z.Y. Jiang, Effects of elastic deformation and temperature on a mixed film lubrication model, Tribology series, vol. 40, 2002, 115-120.

Kosasih, P.B., Tieu, A.K., Li, E.B.  PIV analysis of flow mixing in a journal bearing lubricant supply groove, Proceedings of SPIE - The International Society for Optical Engineering, 4317 (2001) 392-396.

A.K. Tieu, P.B. Kosasih, M. Mackenzie, A Study of Fluid Velocities in Tribological Fluid Film, Trans. ASME Journal of Tribology, Vol. 116, No. 1, 1994, 133-138.

P.B. Kosasih, A.K. Tieu, A Transition-Turbulent Lubrication Theory Using Mixing Length Concept, Trans. ASME Journal of Tribology, Vol. 115, No. 4, 1993, 591-596.

P.B. Kosasih, A.K. Tieu, An Analysis of Superlaminar Diaphragm Thrust Bearings, including Misaligment and Thermal Effects, Wear, 167, 1993, 133-142.

P.B. Kosasih, A.K. Tieu, An Analysis of Sector-Shaped Thrust Bearings Operating in The Transition Regime, Wear, 160, 1993, 291-299.

A.K. Tieu, P.B. Kosasih, An Expression of Reynolds Stresses in Turbulent Lubrication Theory, Trans. ASME Journal of Tribology, Vol. 114, No. 1, 1992, 57-148.


Journal Publications on Renewable Energy:
S. Jafari, B. Kosasih, Analysis of the power augmentation mechanisms of diffuser shrouded micro wind turbine with computational fluid dynamics simulations, wind and structure, Vol.19 No 2, 2014 p 199-217

M. Dicker, B. Kosasih, Large Wind Turbine Structural Load Control : Trailing Edge Deformation Mechanism for Active Variable Camber Blade, Wind Engineering Vol. 38 No 4, 2014, 425-440

S.A.H. Jafari, B. Kosasih, Flow analysis of shrouded small wind turbine with a simple frustum diffuser with computational fluid dynamics simulations, Journal of wind engineering and industrial aerodynamic, 125, 102-110, 2014.

M. Dicker, B. Kosasih, Trailing edge deformation mechanism for active variable - camber wind turbine blade, Applied Mechanics and Materials 493 (2014), 444-449.

B. Kosasih and A.S. Jafari, High-efficiency shrouded micro wind turbine for urban built environment, Applied Mechanics and Materials 493 (2014), 294-299.

P.B. Kosasih, Andrea Tondelli, Experimental Study of Shrouded Micro-Wind Turbine, Procedia Engineering, 49, 2012, 92-98.

L. Ledo, P.B. Kosasih, P. Cooper, Roof Mounting Site Analysis for Micro-Wind Turbines. Renewable Energy, (36) 2011, 1379-1391.


Journal Publications on other areas:
Caesarendra W, Kosasih B, Tieu A K, Moodie C A S, Application of the largest Lyapunov exponent algorithm for feature extraction in low speed slew bearing condition monitoring, Mechanical Systems and Signal Processing 50-51 (2015), 116-138.

Caesarendra W, B. Kosasih, A.K. Tieu, C.A. Moodie (2014), Circular Domain Features Based Condition Monitoring for Low Speed Slewing Bearing, Mechanical System and Signal Processing, 45, 114-138.

W. Caesarendra, B. Kosasih, A.K. Tieu, A.C. Moodie, A. Widodo,Degradation Trend Estimation and Prognosis of Large Low Speed Slewing Bearing Lifetime, Applied Mechanics and Materials 493 (2014), 343-348.

H.T. Zhu, Q. Zhu, P.B. Kosasih, A.K. Tieu, (2013) Investigation on mechanical properties of a high-speed steel roll material by nano-indentation, Materials Research Innovations,Vol 17, 2013, S2-35-39

W.F.H Zamri, P.B. Kosasih, A.K. Tieu, H.T ZHu, Q. Zhu (2013), Finite Element Modelling The Nano-Indentation of Layers of Porous Oxide on High Speed Steel, Steel Research International 84 (2013), 1309-1319.

A. Gareev, B. Kosasih, P. Cooper (2013), CFD analysis of axial flow flow turbines designed to service OWC systems, Engineering Applications of Computational Fluid Dynamics, Vol. 7, 4, 496-506.

W. Caesarendra, J.H. Park, B.H. Choi, P.B. Kosasih, Condition Monitoring of Low Speed Slewing Bearings Based on Ensemble Empirical Mode Decomposition Method, Transactions of the KSNVE, 23(2) , 131-143, 2013.

W. Caesarendra, P.B. Kosasih, A.K. Tieu, B. Choi, C.A. Moodie, Condition Monitoring of Naturally Damaged Slow Speed Slewing Bearing Based on Ensemble Empirical Mode Decomposition, J. Mech. Sci. and Tech., 27 (8) 2013, 2253-2262.

W.F.H. Zamri, P.B. Kosasih, A.K.Tieu, Q. Zhu, H.T. Zhu, Variations in the Microstructure and Mechanical Properties of the Oxide Layer on High Speed Steel Hot Rolling Work Rolls, Journal of Materials Processing Technology, 212, 2012, 2597-2608.

P.B. Kosasih, Learning finite element methods by building applications. International Journal of Mechanical Engineering Education, 38 (2), 2010, 167-184.

K. Popp, M. Kroger, W. Li, X. Zhang, P.B. Kosasih, MRE Properties under shear and squeeze modes and applications. Journal of Intelligent Material Systems and Structures,21 (15), 2010, 1471-1477.

W. Li, K. Popp, X. Zhang, P.B. Kosasih, MRE properties under shear and squeeze modes and applications, Journal of Physics, vol. 149, no. 1, 2009, pp. 1-4.

B. Liu, W. Li, P.B. Kosasih, X.Z. Zhang, A 2-DOF MR Actuator Joystick for Virtual Reality Applications, Sensors & Actuators: A. Physical, 137, 2007, 308-320.

P.B Kosasih, A.K. Tieu, Incorporating GUI in Teaching Numerical Methods for Engineers,International Journal of Mechanical Engineering Education, 35, 2007, 46-55.

A.Godbole, P.B. Kosasih, A. Fuch, Particle Trajectories in Dilute Phase Pneumatic Conveying, Particulate Science & Technology, 25, 2007, 381-385.

B. Liu, W.H. Li, P.B. Kosasih, X.Z. Zhang, Development of an MR-Brake-Based Haptic Device, Smart Materials and Structures, 15, 2006, 1-7.

W.H. Li, P.Q. Zhang, X.L. Gong, P.B. Kosasih, Linear Viscoelasticity of MR Fluids: Dependence on Magnetic Fluids, International Journal of Modern Physics B, 19, 2005, 1198-1204.

W.H. Li, H. Du, P.B. Kosasih, Magnetorheological Fluids Based Haptic Device, Sensor Review, 24(1), 68-73,  2004.