The RLM commands in admin mode enable you to perform most of the tasks supported by the RLM.
RLM admin mode command syntax | Description |
---|---|
events {all | information | newest | oldest | search string} | Displays storage system events logged by the RLM. |
exit | Exits from the RLM command line interface. |
help [command] | Displays a list of available commands. If a command is specified, displays the subcommands available for that command or its syntax usage. |
priv set {admin | advanced | diag} | Sets the privilege level to access the specified mode. |
priv show | Displays the current privilege level. |
rlm reboot | Reboots the RLM. This action takes approximately one minute. |
rlm sensors [-c] | Displays the RLM environmental sensor status. The -c option, which takes a few seconds to display, shows current values, rather than cached values. |
rlm status | Displays RLM status. Note: The Data ONTAP sysconfig command displays both the storage system and RLM status.
|
rlm update http://path | Updates the RLM firmware. |
system console | Logs in to Data ONTAP CLI. Use Ctrl-D to exit. |
system core | Dumps the storage system core and resets the storage system. This command has the same effect as pressing the Non-maskable Interrupt (NMI) button on a storage system. Note: The RLM stays operational as long as input power to the storage system is not interrupted.
|
system power {on | off | cycle} | Turns the storage system on or off, or performs a power cycle. Standby power stays on. Using the system power command may cause an improper shutdown of the storage system. When power-cycling, there is a brief pause before power is turned back on. |
system power status | Displays status for each power supply, such as presence, input power, and output power. |
system reset {primary | backup | current} | Resets the storage system using the specified firmware image. Note: The RLM stays operational as long as input power to the storage system is not interrupted.
|
version | Displays the RLM version information, including hardware and firmware information. |