Command for modifying VLAN interfaces

To enable or disable GVRP on all interfaces of a network adapter, you use the vlan modify command.

As an example, you can enable GVRP only on network adapter e8 of a storage system. However, you cannot enable or disable GVRP on the VLAN interface e8-2. When you enable GVRP on a network adapter, it is enabled on all associated VLANs.

• Modifying VLAN interfaces
  You can modify VLAN interfaces so that GVRP is enabled. GVRP dynamically registers the VLAN memberships of stations on your network. This saves you the overhead of maintaining static VLAN configuration on switch ports every time there is a change in your network.