FAS200 Series Storage Appliance
Hardware and Service Guide

View in Frames

Preface


Chapter 1: Connecting a FAS200 Series Appliance
Connecting your appliance to a network
	Connecting a nonclustered system
	Connecting a clustered system
Connecting additional disk shelves
	Connecting disk shelves to a FAS270
	Connecting disk shelves to a FAS270c
Connecting your system to a power source
Connecting to third-party devices
	Connecting to a third-party tape backup device
	Connecting to a third-party Fibre Channel switch
Connecting your appliance to an ASCII terminal console

Chapter 2: Configuring a FAS270/FAS270c
Configuring for a cluster
	System setup information worksheet
	Disk assignments
	Booting your cluster for the first time
	Setup script questions
Configuring the Fibre Channel port

Chapter 3: Monitoring Your System
Monitoring the front operation panel
Monitoring the power supply
Monitoring the Fibre Channel disk
Monitoring the CPU module

Chapter 4: Replacing FAS200 Series Devices
Replacing a disk
Replacing the CPU module
	Removing the CPU module
	Moving the Data ONTAP software
	Procedures for installing the CPU module
Replacing the SDRAM DIMM on the CPU module
Replacing the CompactFlash card on the CPU module
Replacing the battery on the CPU module
Replacing a power supply
Replacing LRC modules with ESH2 modules in a disk shelf

Chapter 5: Error Messages and Troubleshooting
Startup error messages
Environmental EMS messages
Netboot process for the FAS200 series
Booting your appliance from a backup firmware image
Troubleshooting hardware problems

Appendix A: Recommended Power Line Sizes
Recommended AC power line sizes

Appendix B: Communications Regulations
Regulatory notices
Declaration of Conformity

Appendix C: Feature Update Record

Index

Legal Information

FAS200 Series Storage Appliance Hardware and Service Guide

FAS200 Series Storage Appliance
Hardware and Service Guide