You are here

2016

2016 publications

  1. Abdul Halim, N. S.; Whitten, P. G.; Nghiem, L. D., The effect of aging on thermomechanical and metal extraction properties of poly (vinyl chloride)/Aliquat 336 polymer inclusion membranes. Desalination and Water Treatment 2016, 57 (7), 3298-3303.
  2. Abdul-Halim, N. S.; Whitten, P. G.; Nghiem, L. D., Characteristics and cadmium extraction performance of PVC/Aliquat 336 electrospun fibres in comparison with polymer inclusion membranes. Separation Science and Technology (Philadelphia) 2016, 51 (9), 1515-1522.
  3. Alshehri, S. M.; Aldalbahi, A.; Al-Hajji, A. B.; Chaudhary, A. A.; Panhuis, M. I. H.; Alhokbany, N.; Ahamad, T., Development of carboxymethyl cellulose-based hydrogel and nanosilver composite as antimicrobial agents for UTI pathogens. Carbohydrate Polymers 2016, 138, 229-236.
  4. Alsultan, M.; Ranjbar, A.; Swiegers, G. F.; Wallace, G. G.; Balakrishnan, S.; Huang, J., Application of conducting polymers in solar water-splitting catalysis. In Industrial Applications for Intelligent Polymers and Coatings, Springer International Publishing: 2016; pp 223-251.
  5. Anari, E. H. B.; Romano, M.; Teh, W. X.; Black, J. J.; Jiang, E.; Chen, J.; To, T. Q.; Panchompoo, J.; Aldous, L., Substituted ferrocenes and iodine as synergistic thermoelectrochemical heat harvesting redox couples in ionic liquids. Chemical Communications 2016, 52 (4), 745-748.
  6. Andersen, T. R.; Almyahi, F.; Cooling, N. A.; Elkington, D.; Wiggins, L.; Fahy, A.; Feron, K.; Vaughan, B.; Griffith, M. J.; Mozer, A. J.; Sae-Kung, C.; Wallace, G. G.; Belcher, W. J.; Dastoor, P. C., Comparison of inorganic electron transport layers in fully roll-to-roll coated/printed organic photovoltaics in normal geometry. Journal of Materials Chemistry A 2016, 4 (41), 15986-15996.
  7. Apollo, N. V.; Lau, D.; Ahnood, A.; Stacey, A.; Ganesan, K.; Lichter, S. G.; Fox, K.; Foroughi, J.; Meffin, H.; Wallace, G. G.; Baughman, R.; Prawer, S.; Garrett, D. J., Brazing techniques for the fabrication of biocompatible carbon-based electronic devices. Carbon 2016, 107, 180-189.
  8. Aragonès, A. C.; Haworth, N. L.; Darwish, N.; Ciampi, S.; Bloomfield, N. J.; Wallace, G. G.; Diez-Perez, I.; Coote, M. L., Electrostatic catalysis of a Diels-Alder reaction. Nature 2016, 531 (7592), 88-91.
  9. Aziz, S.; Naficy, S.; Foroughi, J.; Brown, H. R.; Spinks, G. M., Controlled and scalable torsional actuation of twisted nylon 6 fiber. Journal of Polymer Science, Part B: Polymer Physics 2016, 54 (13), 1278-1286.
  10. Bakarich, S. E.; Gorkin, R.; Naficy, S.; Gately, R.; Panhuis, M. I. H.; Spinks, G. M. In 3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices, MRS Advances, Materials Research Society: 2016; pp 521-526.
  11. Bauquier, S. H.; Jiang, J. L.; Yue, Z.; Lai, A.; Chen, Y.; Moulton, S. E.; McLean, K. J.; Vogrin, S.; Halliday, A. J.; Wallace, G.; Cook, M. J., Antiepileptic effects of lacosamide loaded polymers implanted subdurally in GAERS. International Journal of Polymer Science 2016, 2016.
  12. Boskovic, D.; Balakrishnan, S.; Chen, J.; Wagner, P.; Swiegers, G. F., Studies of poly(3,4-ethylenedioxythiophene) (PEDOT) films containing cationic Mn porphyrins. A loading-dependent demetalation of Mn(III)TPP in PEDOT (Mn(III)TPP=5,10,15,20-tetraphenylporphyrinato manganese(III)). Journal of Porphyrins and Phthalocyanines 2016, 20 (12), 1463-1476.
  13. Boskovic, D.; Balakrishnan, S.; Huang, S.; Swiegers, G. F., Kinematic molecular manufacturing machines. Coordination Chemistry Reviews 2016, 329, 163-190.
  14. Brzeczek, A.; Piwowar, K.; Domagala, W.; Mikołajczyk, M. M.; Walczak, K.; Wagner, P., Systematic elongation of thienyl linkers and their effect on optical and electrochemical properties in carbazole-BODIPY donor-acceptor systems. RSC Advances 2016, 6 (43), 36500-36509.
  15. Choi, C.; Kim, K. M.; Kim, K. J.; Lepró, X.; Spinks, G. M.; Baughman, R. H.; Kim, S. J., Improvement of system capacitance via weavable superelastic biscrolled yarn supercapacitors. Nature Communications 2016, 7.
  16. Choi, C.; Sim, H. J.; Spinks, G. M.; Lepró, X.; Baughman, R. H.; Kim, S. J., Elastomeric and Dynamic MnO2/CNT Core-Shell Structure Coiled Yarn Supercapacitor. Advanced Energy Materials 2016, 6 (5).
  17. Choi, J.; Benedetti, T. M.; Jalili, R.; Walker, A.; Wallace, G. G.; Officer, D. L., High Performance Fe Porphyrin/Ionic Liquid Co-catalyst for Electrochemical CO2Reduction. Chemistry - A European Journal 2016, 22 (40), 14158-14161.
  18. Chung, J. H. Y.; Naficy, S.; Wallace, G. G.; Naficy, S.; O'Leary, S., Inkjet-Printed Alginate Microspheres as Additional Drug Carriers for Injectable Hydrogels. Advances in Polymer Technology 2016, 35 (4), 439-446.
  19. Czichy, M.; Wagner, P.; Łapkowski, M.; Officer, D. L., Effect of π-conjugation on electrochemical properties of poly(terthiophene)s 3′-substituted with fullerene C60. Journal of Electroanalytical Chemistry 2016, 772, 103-109.
  20. Esrafilzadeh, D.; Jalili, R.; Liu, X.; Gilmore, K. J.; Razal, J. M.; Moulton, S. E.; Wallace, G. G., A novel and facile approach to fabricate a conductive and biomimetic fibrous platform with sub-micron and micron features. Journal of Materials Chemistry B 2016, 4 (6), 1056-1063.
  21. Esrafilzadeh, D.; Jalili, R.; Stewart, E. M.; Aboutalebi, S. H.; Razal, J. M.; Moulton, S. E.; Wallace, G. G., High-Performance Multifunctional Graphene-PLGA Fibers: Toward Biomimetic and Conducting 3D Scaffolds. Advanced Functional Materials 2016, 26 (18), 3105-3117.
  22. Foroughi, J.; Antiohos, D.; Wallace, G. G., Effect of post-spinning on the electrical and electrochemical properties of wet spun graphene fibre. RSC Advances 2016, 6 (52), 46427-46432.
  23. Foroughi, J.; Mitew, T.; Ogunbona, P.; Raad, R.; Safaei, F., Smart Fabrics and Networked Clothing: Recent developments in CNT-based fibers and their continual refinement. IEEE Consumer Electronics Magazine 2016, 5 (4), 105-111.
  24. Foroughi, J.; Spinks, G. M.; Aziz, S.; Mirabedini, A.; Jeiranikhameneh, A.; Wallace, G. G.; Kozlov, M. E.; Baughman, R. H., Knitted Carbon-Nanotube-Sheath/Spandex-Core Elastomeric Yarns for Artificial Muscles and Strain Sensing. ACS Nano 2016, 10 (10), 9129-9135.
  25. Gao, H.; Zhou, T.; Zheng, Y.; Liu, Y.; Chen, J.; Liu, H.; Guo, Z., Integrated Carbon/Red Phosphorus/Graphene Aerogel 3D Architecture via Advanced Vapor-Redistribution for High-Energy Sodium-Ion Batteries. Advanced Energy Materials 2016, 6 (21).
  26. Gonçales, V. R.; Wu, Y.; Gupta, B.; Parker, S. G.; Yang, Y.; Ciampi, S.; Tilley, R.; Gooding, J. J., Stability of Chemically Passivated Silicon Electrodes in Aqueous Solutions: Interplay between Bias Voltage and Hydration of the Electrolyte. Journal of Physical Chemistry C 2016, 120 (29), 15941-15948.
  27. Gonçalves, R.; Larrea, A.; Zheng, T.; Higgins, M. J.; Sebastian, V.; Lanceros-Mendez, S.; Martins, P., Synthesis of highly magnetostrictive nanostructures and their application in a polymer-based magnetoelectric sensing device. European Polymer Journal 2016, 84, 685-692.
  28. Gopinathan, J.; Quigley, A. F.; Bhattacharyya, A.; Padhye, R.; Kapsa, R. M. I.; Nayak, R.; Shanks, R. A.; Houshyar, S., Preparation, characterisation, and in vitro evaluation of electrically conducting poly(ε-caprolactone)-based nanocomposite scaffolds using PC12 cells. Journal of Biomedical Materials Research - Part A 2016, 104 (4), 853-865.
  29. Gu, Q.; Tomaskovic-Crook, E.; Lozano, R.; Chen, Y.; Kapsa, R. M.; Zhou, Q.; Wallace, G. G.; Crook, J. M., Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells. Advanced Healthcare Materials 2016, 5 (12), 1429-1438.
  30. Gu, Q.; Tomaskovic-Crook, E.; Lozano, R.; Chen, Y.; Kapsa, R. M.; Zhou, Q.; Wallace, G. G.; Crook, J. M., Stem Cell Bioprinting: Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells (Adv. Healthcare Mater. 12/2016). Advanced Healthcare Materials 2016, 5 (12), 1428.
  31. Gu, Q.; Zhu, H.; Chen, L.; Shuai, L.; Fang, J.; Wu, J.; Liu, L.; Li, W.; Dai, J.; Hao, J.; Zhou, Q., Three dimensional collagen scaffolds promote iPSC induction with higher pluripotency. Protein and Cell 2016, 7 (11), 844-848.
  32. Gu, Q.; Zhu, H.; Li, J.; Li, X.; Hao, J.; Wallace, G. G.; Zhou, Q., Three-dimensional bioprinting speeds up smart regenerative medicine. National Science Review 2016, 3 (3), 331-344.
  33. Gupta, V.; Talebi, M.; Deverell, J.; Sandron, S.; Nesterenko, P. N.; Heery, B.; Thompson, F.; Beirne, S.; Wallace, G. G.; Paull, B., 3D printed titanium micro-bore columns containing polymer monoliths for reversed-phase liquid chromatography. Analytica Chimica Acta 2016, 910, 84-94.
  34. Harris, A. R.; Hutchinson, R.; Molino, P. J.; Kapsa, R. M. I.; Clark, G. M.; Paolini, A. G.; Wallace, G. G., Correlation of impedance and effective electrode area of dextran sulfate doped PEDOT modified electrodes. Journal of the Electrochemical Society 2016, 163 (7), H534-H540.
  35. Harris, A. R.; Molino, P. J.; Kapsa, R. M. I.; Clark, G. M.; Paolini, A. G.; Wallace, G. G., Effective area and charge density of dextran sulphate doped PEDOT modified electrodes. Synthetic Metals 2016, 220, 394-401.
  36. Harris, A. R.; Molino, P. J.; Paolini, A. G.; Wallace, G. G., Correlation of impedance and effective electrode area of chondroitin sulphate doped PEDOT modified electrodes. Synthetic Metals 2016, 222, 338-343.
  37. Harris, A. R.; Molino, P. J.; Paolini, A. G.; Wallace, G. G., Effective Area and Charge Density of Chondroitin Sulphate Doped PEDOT Modified Electrodes. Electrochimica Acta 2016, 197, 99-106.
  38. Hoogeveen, D. A.; Fournier, M.; Bonke, S. A.; Fang, X. Y.; Mozer, A. J.; Mishra, A.; Bäuerle, P.; Simonov, A. N.; Spiccia, L., Photo-electrocatalytic hydrogen generation at dye-sensitised electrodes functionalised with a heterogeneous metal catalyst. Electrochimica Acta 2016, 219, 773-780.
  39. Jalili, R.; Aminorroaya-Yamini, S.; Benedetti, T. M.; Aboutalebi, S. H.; Chao, Y.; Wallace, G. G.; Officer, D. L., Processable 2D materials beyond graphene: MoS2 liquid crystals and fibres. Nanoscale 2016, 8 (38), 16862-16867.
  40. Jia, X.; Wang, C.; Zhao, C.; Ge, Y.; Wallace, G. G., Toward Biodegradable Mg-Air Bioelectric Batteries Composed of Silk Fibroin-Polypyrrole Film. Advanced Functional Materials 2016, 26 (9), 1454-1462.
  41. Jia, Y.; Zhang, L.; Du, A.; Gao, G.; Chen, J.; Yan, X.; Brown, C. L.; Yao, X., Defect Graphene as a Trifunctional Catalyst for Electrochemical Reactions. Advanced Materials 2016, 28 (43), 9532-9538.
  42. Kashi, M. B.; Wu, Y.; Gonçales, V. R.; Choudhury, M. H.; Ciampi, S.; Gooding, J. J., Silicon–SAM–AuNP electrodes: Electrochemical “switching” and stability. Electrochemistry Communications 2016, 70, 28-32.
  43. Keller, A.; Stevens, L.; Wallace, G. G.; Panhuis, M. I. H. In 3D Printed Edible Hydrogel Electrodes, MRS Advances, Materials Research Society: 2016; pp 527-532.
  44. Khaldi, A.; Maziz, A.; Alici, G.; Spinks, G. M.; Jager, E. W. H., Bottom-up microfabrication process for individually controlled conjugated polymer actuators. Sensors and Actuators, B: Chemical 2016, 230, 818-824.
  45. Kim, B. C.; Rajesh, M.; Jang, H. S.; Yu, K. H.; Kim, S. J.; Park, S. Y.; Raj, C. J., Facile synthesis and capacitive properties of nickel-cobalt binary metal oxide nanoaggregates via oxalate route. Journal of Alloys and Compounds 2016, 674, 376-383.
  46. Kim, K. M.; Lee, J. A.; Sim, H. J.; Kim, K. A.; Jalili, R.; Spinks, G. M.; Kim, S. J., Shape-engineerable composite fibers and their supercapacitor application. Nanoscale 2016, 8 (4), 1910-1914.
  47. Kim, S. H.; Kwon, C. H.; Park, K.; Mun, T. J.; Lepró, X.; Baughman, R. H.; Spinks, G. M.; Kim, S. J., Bio-inspired, moisture-powered hybrid carbon nanotube yarn muscles. Scientific Reports 2016, 6.
  48. Knittel, P.; Zhang, H.; Kranz, C.; Wallace, G. G.; Higgins, M. J., Probing the PEDOT:PSS/cell interface with conductive colloidal probe AFM-SECM. Nanoscale 2016, 8 (8), 4475-4481.
  49. Kodali, G.; Mancini, J. A.; Solomon, L. A.; Episova, T. V.; Roach, N.; Hobbs, C. J.; Wagner, P.; Mass, O. A.; Aravindu, K.; Barnsley, J. E.; Gordon, K. C.; Officer, D. L.; Dutton, P. L.; Moser, C. C., Design and engineering of water-soluble light-harvesting protein maquettes. Chemical Science 2016, 8 (1), 316-324.
  50. Kongahge, D.; Foroughi, J.; Gambhir, S.; Spinks, G. M.; Wallace, G. G., Fabrication of a graphene coated nonwoven textile for industrial applications. RSC Advances 2016, 6 (77), 73203-73209.
  51. Ledwon, P.; Zassowski, P.; Jarosz, T.; Lapkowski, M.; Wagner, P.; Cherpak, V.; Stakhira, P., A novel donor-acceptor carbazole and benzothiadiazole material for deep red and infrared emitting applications. Journal of Materials Chemistry C 2016, 4 (11), 2219-2227.
  52. Lee, C. Y.; Park, H. S.; Fontecilla-Camps, J. C.; Reisner, E., Photoelectrochemical H2 Evolution with a Hydrogenase Immobilized on a TiO2-Protected Silicon Electrode. Angewandte Chemie - International Edition 2016, 55 (20), 5971-5974.
  53. Lee, C. Y.; Reuillard, B.; Sokol, K. P.; Laftsoglou, T.; Lockwood, C. W. J.; Rowe, S. F.; Hwang, E. T.; Fontecilla-Camps, J. C.; Jeuken, L. J. C.; Butt, J. N.; Reisner, E., A decahaem cytochrome as an electron conduit in protein-enzyme redox processes. Chemical Communications 2016, 52 (46), 7390-7393.
  54. Lee, J. A.; Aliev, A. E.; Bykova, J. S.; de Andrade, M. J.; Kim, D.; Sim, H. J.; Lepró, X.; Zakhidov, A. A.; Lee, J. B.; Spinks, G. M.; Roth, S.; Kim, S. J.; Baughman, R. H., Woven-Yarn Thermoelectric Textiles. Advanced Materials 2016, 5038-5044.
  55. Lee, W. G.; Cho, W. J.; Whang, Y. H.; Raj, C. J.; Kim, B. C.; Park, J. H.; Yu, K. H., Feasible study of polypyrrole film in single and double cationic ionic liquids as novel electrolytes for energy storage applications. Synthetic Metals 2016, 222, 274-284.
  56. Li, X. J.; Song, Z. W.; Zhao, Y.; Wang, Y.; Zhao, X. C.; Liang, M.; Chu, W. G.; Jiang, P.; Liu, Y., Vertically porous nickel thin film supported Mn 3 O 4 for enhanced energy storage performance. Journal of Colloid and Interface Science 2016, 483, 17-25.
  57. Lisak, G.; Wagner, K.; Wagner, P.; Barnsley, J. E.; Gordon, K. C.; Bobacka, J.; Wallace, G. G.; Ivaska, A.; Officer, D. L., A novel modified terpyridine derivative as a model molecule to study kinetic-based optical spectroscopic ion determination methods. Synthetic Metals 2016, 219, 101-108.
  58. Liu, L.; Hou, Y.; Wang, J.; Chen, J.; Liu, H. K.; Wu, Y.; Wang, J., Nanofibrous Co 3 O 4 /PPy Hybrid with Synergistic Effect as Bifunctional Catalyst for Lithium-Oxygen Batteries. Advanced Materials Interfaces 2016, 3 (13).
  59. Liu, L.; Wang, J.; Hou, Y.; Chen, J.; Liu, H. K.; Wang, J.; Wu, Y., Self-Assembled 3D Foam-Like NiCo 2 O 4 as Efficient Catalyst for Lithium Oxygen Batteries. Small 2016, 12 (5), 602-611.
  60. Liu, Y.; Weng, B.; Xu, Q.; Hou, Y.; Zhao, C.; Beirne, S.; Shu, K.; Jalili, R.; Wallace, G. G.; Razal, J. M.; Chen, J., Facile Fabrication of Flexible Microsupercapacitor with High Energy Density. Advanced Materials Technologies 2016, 1 (9).
  61. Lozano, R.; Gilmore, K. J.; Thompson, B. C.; Stewart, E. M.; Waters, A. M.; Romero-Ortega, M.; Wallace, G. G., Electrical stimulation enhances the acetylcholine receptors available for neuromuscular junction formation. Acta Biomaterialia 2016, 45, 328-339.
  62. Lozano, R.; Stevens, L.; Thompson, B. C.; Gilmore, K. J.; Gorkin, R.; Stewart, E. M.; Panhuis, M. I. H.; Romero-Ortega, M.; Wallace, G. G., Brain on a bench top: Cortical neurons within a 3D printed structure. Materials Today 2016, 19 (2), 124-125.
  63. Mahmoudzadeh, M. A.; Usagocar, A.; Giorgio, J.; Officer, D. L.; Wallace, G. G.; Madden, J. D. W. In Solar rechargeable redox battery based on polysulfide electrochemistry, Symposium on Electrochemistry and Batteries for Safe and Low-Cost Energy Storage - 229th ECS Meeting, Xiao, J.; Liu, P.; Van Nguyen, T.; Kalra, V.; Wu, J.; Yao, Y., Eds. Electrochemical Society Inc.: 2016; pp 23-31.
  64. Mahmoudzadeh, M. A.; Usgaocar, A. R.; Giorgio, J.; Officer, D. L.; Wallace, G. G.; Madden, J. D. W., A high energy density solar rechargeable redox battery. Journal of Materials Chemistry A 2016, 4 (9), 3446-3452.
  65. Mehrali, M.; Sadeghinezhad, E.; Akhiani, A. R.; Tahan Latibari, S.; Talebian, S.; Dolatshahi-Pirouz, A.; Metselaar, H. S. C.; Mehrali, M., An ecofriendly graphene-based nanofluid for heat transfer applications. Journal of Cleaner Production 2016, 137, 555-566.
  66. Mirabedini, A.; Foroughi, J.; Farajikhah, S.; Wallace, G. G., Correction: Developments in conducting polymer fibres: From established spinning methods toward advanced applications (RSC Advances (2016) 6 (44687-44716)). RSC Advances 2016, 6 (110).
  67. Mirabedini, A.; Foroughi, J.; Thompson, B.; Wallace, G. G., Fabrication of Coaxial Wet-Spun Graphene-Chitosan Biofibers. Advanced Engineering Materials 2016, 18 (2), 284-293.
  68. Mirabedini, A.; Foroughi, J.; Wallace, G. G., Developments in conducting polymer fibres: From established spinning methods toward advanced applications. RSC Advances 2016, 6 (50), 44687-44716.
  69. Molino, P. J.; Chiovitti, A.; Higgins, M. J.; Dugdale, T. M.; Wetherbee, R., Diatom adhesives: Molecular and mechanical properties. In Biological Adhesives, Second Edition, Springer International Publishing: 2016; pp 57-86.
  70. Murakami, T.; Brown, H. R.; Hawker, C. J., One-pot fabrication of robust interpenetrating hydrogels via orthogonal click reactions. Journal of Polymer Science, Part A: Polymer Chemistry 2016, 54 (11), 1459-1467.
  71. Murray, E.; Thompson, B. C.; Wallace, G. G., Applications of graphene in tissue engineering. In Graphene Science Handbook: Applications and Industrialization, CRC Press: 2016; pp 353-363.
  72. Mustapić, M.; Al Hossain, M. S.; Horvat, J.; Wagner, P.; Mitchell, D. R. G.; Kim, J. H.; Alici, G.; Nakayama, Y.; Martinac, B., Controlled delivery of drugs adsorbed onto porous Fe 3 O 4 structures by application of AC/DC magnetic fields. Microporous and Mesoporous Materials 2016, 226, 243-250.
  73. Mutlu, R.; Yildiz, S. K.; Alici, G.; In Het Panhuis, M.; Spinks, G. M. In Mechanical stiffness augmentation of a 3D printed soft prosthetic finger, 2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Institute of Electrical and Electronics Engineers Inc.: 2016; pp 7-12.
  74. Nattestad, A.; Perera, I.; Spiccia, L., Developments in and prospects for photocathodic and tandem dye-sensitized solar cells. Journal of Photochemistry and Photobiology C: Photochemistry Reviews 2016, 28, 44-71.
  75. O'Connell, C. D.; Di Bella, C.; Thompson, F.; Augustine, C.; Beirne, S.; Cornock, R.; Richards, C. J.; Chung, J.; Gambhir, S.; Yue, Z.; Bourke, J.; Zhang, B.; Taylor, A.; Quigley, A.; Kapsa, R.; Choong, P.; Wallace, G. G., Development of the Biopen: A handheld device for surgical printing of adipose stem cells at a chondral wound site. Biofabrication 2016, 8 (1).
  76. Pandav, S. S.; Ross, C. M.; Thattaruthody, F.; Nada, R.; Singh, N.; Gautam, N.; Beirne, S.; Wallace, G. G.; Sherwood, M. B.; Crowston, J. G.; Coote, M., Porosity of bleb capsule declines rapidly with fluid challenge. Journal of Current Glaucoma Practice 2016, 10 (3), 91-96.
  77. Poulin, P.; Jalili, R.; Neri, W.; Nallet, F.; Divoux, T.; Colin, A.; Aboutalebi, S. H.; Wallace, G.; Zakri, C., Superflexibility of graphene oxide. Proceedings of the National Academy of Sciences of the United States of America 2016, 113 (40), 11088-11093.
  78. Rajesh, M.; Raj, C. J.; Kim, B. C.; Cho, B. B.; Ko, J. M.; Yu, K. H., Supercapacitive studies on electropolymerized natural organic phosphate doped polypyrrole thin films. Electrochimica Acta 2016, 220, 373-383.
  79. Rajesh, M.; Raj, C. J.; Kim, B. C.; Manikandan, R.; Kim, S. J.; Park, S. Y.; Lee, K.; Yu, K. H., Expeditious and eco-friendly hydrothermal polymerization of PEDOT nanoparticles for binder-free high performance supercapacitor electrodes. RSC Advances 2016, 6 (111), 110433-110443.
  80. Ren, L.; Zhuang, J.; Casillas, G.; Feng, H.; Liu, Y.; Xu, X.; Liu, Y.; Chen, J.; Du, Y.; Jiang, L.; Dou, S. X., Nanodroplets for Stretchable Superconducting Circuits. Advanced Functional Materials 2016, 26 (44), 8111-8118.
  81. Rylands, B.; Böhme, T.; Gorkin, R.; Fan, J.; Birtchnell, T., The adoption process and impact of additive manufacturing on manufacturing systems. Journal of Manufacturing Technology Management 2016, 27 (7), 969-989.
  82. Sangian, D.; Naficy, S.; Spinks, G. M., Thermally activated paraffin-filled McKibben muscles. Journal of Intelligent Material Systems and Structures 2016, 27 (18), 2508-2516.
  83. Sayyar, S.; Bjorninen, M.; Haimi, S.; Miettinen, S.; Gilmore, K.; Grijpma, D.; Wallace, G., UV cross-linkable graphene/poly(trimethylene carbonate) composites for 3D printing of electrically conductive scaffolds. ACS Applied Materials and Interfaces 2016, 8 (46), 31916-31925.
  84. Sayyar, S.; Murray, E.; Gambhir, S.; Spinks, G.; Wallace, G. G.; Officer, D. L., Synthesis and Characterization of Covalently Linked Graphene/Chitosan Composites. JOM 2016, 68 (1), 384-390.
  85. Schirmer, K. S. U.; Esrafilzadeh, D.; Thompson, B. C.; Quigley, A. F.; Kapsa, R. M. I.; Wallace, G. G., Conductive composite fibres from reduced graphene oxide and polypyrrole nanoparticles. Journal of Materials Chemistry B 2016, 4 (6), 1142-1149.
  86. Schirmer, K. S. U.; Gorkin, R.; Beirne, S.; Stewart, E.; Thompson, B. C.; Quigley, A. F.; Kapsa, R. M. I.; Wallace, G. G., Cell compatible encapsulation of filaments into 3D hydrogels. Biofabrication 2016, 8 (2).
  87. Seok Jang, H.; Justin Raj, C.; Lee, W. G.; Chul Kim, B.; Hyun Yu, K., Enhanced supercapacitive performances of functionalized activated carbon in novel gel polymer electrolytes with ionic liquid redox-mediated poly(vinyl alcohol)/phosphoric acid. RSC Advances 2016, 6 (79), 75376-75383.
  88. Seyedin, S.; Razal, J. M.; Innis, P. C.; Jalili, R.; Wallace, G. G., Compositional Effects of Large Graphene Oxide Sheets on the Spinnability and Properties of Polyurethane Composite Fibers. Advanced Materials Interfaces 2016, 3 (5).
  89. Seyedin, S.; Razal, J. M.; Innis, P. C.; Wallace, G. G., A facile approach to spinning multifunctional conductive elastomer fibres with nanocarbon fillers. Smart Materials and Structures 2016, 25 (3).
  90. Shu, K.; Wang, C.; Zhao, C.; Ge, Y.; Wallace, G. G., A Free-standing Graphene-Polypyrrole Hybrid Paper via Electropolymerization with an Enhanced Areal Capacitance. Electrochimica Acta 2016, 212, 561-571.
  91. Stevens, L. R.; Gilmore, K. J.; Wallace, G. G.; In het Panhuis, M., Tissue engineering with gellan gum. Biomaterials Science 2016, 4 (9), 1276-1290.
  92. Sun, H.; Zhang, L.; Dong, L.; Zhu, X.; Ming, S.; Zhang, Y.; Xing, H.; Duan, X.; Xu, J., Aqueous electrosynthesis of an electrochromic material based water-soluble EDOT-MeNH2 hydrochloride. Synthetic Metals 2016, 211, 147-154.
  93. Sun, W.; Hu, Z.; Wang, C.; Tao, Z.; Chou, S. L.; Kang, Y. M.; Liu, H. K., Effects of Carbon Content on the Electrochemical Performances of MoS2-C Nanocomposites for Li-Ion Batteries. ACS Applied Materials and Interfaces 2016, 8 (34), 22168-22174.
  94. Tham, Y. Y.; Molino, P. J.; Higgins, M. J.; Stack, K. R.; Richardson, D. E.; Lewis, T. W., The study of deposition of wood extractives and model compound colloids onto chromium and cellulose surfaces using quartz crystal microbalance with dissipation (QCM-D). Colloids and Surfaces A: Physicochemical and Engineering Aspects 2016, 491, 1-11.
  95. Tham, Y. Y.; Stack, K. R.; Richardson, D. E.; Molino, P. J.; Higgins, M. J.; Lewis, T. W., Development of in situ soft colloidal probe atomic force microscopy for probing the adhesion between wood extractives and model surfaces. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2016,500, 203-213.
  96. Vine, K. L.; Belfiore, L.; Jones, L.; Locke, J. M.; Wade, S.; Minaei, E.; Ranson, M., N-alkylated isatins evade P-gp mediated efflux and retain potency in MDR cancer cell lines. Heliyon 2016, 2 (1).
  97. Wanawananon, K.; Moulton, S. E.; Wallace, G. G.; Liawruangrath, S., Fabrication of novel core–shell PLGA and alginate fiber for dual-drug delivery system. Polymers for Advanced Technologies 2016, 27 (8), 1014-1019.
  98. Wang, J.; Gu, Q.; Hao, J.; Bai, D.; Wang, L.; Liu, Z.; Zhou, Q., Efficient Derivation of Human Induced Pluripotent Stem Cells with a c-Myc-Free Non-Integrating Episomal Vector. Journal of Genetics and Genomics 2016, 43 (3), 161-164.
  99. Wang, M.; Hou, Y.; Slade, R. C. T.; Wang, J.; Shi, D.; Wexler, D.; Liu, H.; Chen, J., Core-shell Co/CoO integrated on 3D nitrogen doped reduced graphene oxide aerogel as an enhanced electrocatalyst for the oxygen reduction reaction. Frontiers in Chemistry 2016, 4 (AUG).
  100. Wang, M. Y.; Zhu, W.; Ma, L.; Ma, J. J.; Zhang, D. E.; Tong, Z. W.; Chen, J., Enhanced simultaneous detection of ractopamine and salbutamol - Via electrochemical-facial deposition of MnO2 nanoflowers onto 3D RGO/Ni foam templates. Biosensors and Bioelectronics 2016, 78, 259-266.
  101. Wang, Y.; Wang, C.; Wang, Y.; Liu, H.; Huang, Z., Boric Acid Assisted Reduction of Graphene Oxide: A Promising Material for Sodium-Ion Batteries. ACS Applied Materials and Interfaces 2016, 8 (29), 18860-18866.
  102. Wang, Y.; Wang, C.; Wang, Y.; Liu, H.; Huang, Z., Superior sodium-ion storage performance of Co 3 O 4 @nitrogen-doped carbon: Derived from a metal-organic framework. Journal of Materials Chemistry A 2016, 4 (15), 5428-5435.
  103. Weng, B.; Ding, A.; Liu, Y.; Diao, J.; Razal, J.; Lau, K. T.; Shepherd, R.; Li, C.; Chen, J., Hierarchical Nafion enhanced carbon aerogels for sensing applications. Nanoscale 2016, 8 (6), 3416-3424.
  104. Wu, Y.; Kashi, M. B.; Yang, Y.; Gonçales, V. R.; Ciampi, S.; Tilley, R. D.; Gooding, J. J., Light-activated electrochemistry on alkyne-terminated Si(100) surfaces towards solution-based redox probes. Electrochimica Acta 2016, 213, 540-546.
  105. Xin, H.; Brown, H. R.; Naficy, S.; Spinks, G. M., Mechanical recoverability and damage process of ionic-covalent PAAm-alginate hybrid hydrogels. Journal of Polymer Science, Part B: Polymer Physics 2016, 54 (1), 53-63.
  106. Xiong, J.; Han, C.; Li, W.; Sun, Q.; Chen, J.; Chou, S.; Li, Z.; Dou, S., Ambient synthesis of a multifunctional 1D/2D hierarchical Ag-Ag2S nanowire/nanosheet heterostructure with diverse applications. CrystEngComm 2016, 18 (6), 930-937.
  107. Xiong, J.; Sun, Q.; Chen, J.; Li, Z.; Dou, S., Ambient controlled synthesis of advanced core-shell plasmonic Ag@ZnO photocatalysts. CrystEngComm 2016, 18 (10), 1713-1722.
  108. Yamamoto, S.; Mori, S.; Wagner, P.; Mozer, A. J.; Kimura, M., A Novel Covalently Linked Zn Phthalocyanine-Zn Porphyrin Dyad for Dye-sensitized Solar Cells. Israel Journal of Chemistry 2016, 56 (2-3), 175-180.
  109. Yang, Y.; Ciampi, S.; Choudhury, M. H.; Gooding, J. J., Light Activated Electrochemistry: Light Intensity and pH Dependence on Electrochemical Performance of Anthraquinone Derivatized Silicon. Journal of Physical Chemistry C 2016, 120 (5), 2874-2882.
  110. Yang, Y.; Ciampi, S.; Zhu, Y.; Gooding, J. J., Light-Activated Electrochemistry for the Two-Dimensional Interrogation of Electroactive Regions on a Monolithic Surface with Dramatically Improved Spatial Resolution. Journal of Physical Chemistry C 2016, 120 (24), 13032-13038.
  111. Yu, C.; Wang, C.; Liu, X.; Jia, X.; Naficy, S.; Shu, K.; Forsyth, M.; Wallace, G. G., A Cytocompatible Robust Hybrid Conducting Polymer Hydrogel for Use in a Magnesium Battery. Advanced Materials 2016, 28 (42), 9349-9355.
  112. Zhang, B.; Molino, P. J.; Harris, A. R.; Yue, Z.; Moulton, S. E.; Wallace, G. G., Conductive and protein resistant polypyrrole films for dexamethasone delivery. Journal of Materials Chemistry B 2016, 4 (15), 2570-2577.
  113. Zhang, B. G. X.; Quigley, A. F.; Bourke, J. L.; Nowell, C. J.; Myers, D. E.; Choong, P. F. M.; Kapsa, R. M. I., Combination of agrin and laminin increase acetylcholine receptor clustering and enhance functional neuromuscular junction formation In vitro. Developmental Neurobiology 2016, 76 (5), 551-565.
  114. Zhang, G.; Clarke, T. M.; Mozer, A. J., Bimolecular Recombination in a Low Bandgap Polymer:PCBM Blend Solar Cell with a High Dielectric Constant. Journal of Physical Chemistry C 2016, 120 (13), 7033-7043.
  115. Zhang, L.; Vogel, Y. B.; Noble, B. B.; Gonçales, V. R.; Darwish, N.; Brun, A. L.; Gooding, J. J.; Wallace, G. G.; Coote, M. L.; Ciampi, S., TEMPO Monolayers on Si(100) Electrodes: Electrostatic Effects by the Electrolyte and Semiconductor Space-Charge on the Electroactivity of a Persistent Radical. Journal of the American Chemical Society 2016, 138 (30), 9611-9619.
  116. Zhang, Y.; Liu, X.; Jamal, S. S.; Hinton, B. R. W.; Moulton, S. E.; Wallace, G. G.; Forsyth, M., The effect of treatment time on the ionic liquid surface film formation: Promising surface coating for Mg alloy AZ31. Surface and Coatings Technology 2016, 296, 192-202.
  117. Zhang, Y.; Ogunbona, P. O.; Li, W.; Wallace, G. G. In Learning structured dictionary based on inter-class similarity and representative margins, 41st IEEE International Conference on Acoustics, Speech and Signal Processing, ICASSP 2016, Institute of Electrical and Electronics Engineers Inc.: 2016; pp 2399-2403.
  118. Zhao, L.; Wagner, P.; Barnsley, J. E.; Clarke, T. M.; Gordon, K. C.; Mori, S.; Mozer, A. J., Enhancement of dye regeneration kinetics in dichromophoric porphyrin-carbazole triphenylamine dyes influenced by more exposed radical cation orbitals. Chemical Science 2016, 7 (6), 3506-3516.
  119. Zhao, Y.; Wang, C.; Wallace, G. G., Tin nanoparticles decorated copper oxide nanowires for selective electrochemical reduction of aqueous CO2 to CO. Journal of Materials Chemistry A 2016, 4 (27), 10710-10718.
  120. Zheng, W.; Spinks, G. M.; Wallace, G. G., Organic conducting polymer actuators. In The WSPC Reference on Organic Electronics: Organic Semiconductors, World Scientific Publishing Co. Pte. Ltd.: 2016; Vol. 2, pp 321-343.