2014 publications

  1. Aboutalebi, S. H.; Jalili, R.; Esrafilzadeh, D.; Salari, M.; Gholamvand, Z.; Aminorroaya Yamini, S.; Konstantinov, K.; Shepherd, R. L.; Chen, J.; Moulton, S. E.; Innis, P. C.; Minett, A. I.; Razal, J. M.; Wallace, G. G., High-performance multifunctional Graphene yarns: Toward wearable all-carbon energy storage textiles. ACS Nano 2014, 8 (3), 2456-2466.
  2. Bakarich, S. E.; Balding, P.; Gorkin Iii, R.; Spinks, G. M.; In Het Panhuis, M., Printed ionic-covalent entanglement hydrogels from carrageenan and an epoxy amine. RSC Advances 2014, 4 (72), 38088-38092.
  3. Bakarich, S. E.; Gorkin, R.; Panhuis, M.; Spinks, G. M., Three-dimensional printing fiber reinforced hydrogel composites. ACS Applied Materials and Interfaces 2014, 6 (18), 15998-16006.
  4. Boonprakob, N.; Wetchakun, N.; Phanichphant, S.; Waxler, D.; Sherrell, P.; Nattestad, A.; Chen, J.; Inceesungvorn, B., Enhanced visible-light photocatalytic activity of g-C3N4/TiO2 films. Journal of Colloid and Interface Science 2014, 417, 402-409.
  5. Calvert, P.; In Het Panhuis, M.; Spinks, G.; Gorkin, R.; Stevens, L.; Bakarich, S. E.; Balding, P.; Kirchmajer, D. M. In Strong tough gels for 3D tissue constructs, 2013 MRS Fall Meeting, Boston, MA, Materials Research Society: Boston, MA, 2014.
  6. Channei, D.; Inceesungvorn, B.; Wetchakun, N.; Ukritnukun, S.; Nattestad, A.; Chen, J.; Phanichphant, S., Photocatalytic degradation of methyl orange by CeO2 and Fe-doped CeO2 films under visible light irradiation. Scientific Reports 2014, 4.
  7. Chun, K. Y.; Kim, S. H.; Shin, M. K.; Kwon, C. H.; Park, J.; Kim, Y. T.; Spinks, G. M.; Lima, M. D.; Haines, C. S.; Baughman, R. H.; Kim, S. J., Hybrid carbon nanotube yarn artificial muscle inspired by spider dragline silk. Nature Communications 2014, 5.
  8. Ciampi, S.; Luais, E.; James, M.; Choudhury, M. H.; Darwish, N. A.; Gooding, J. J., The rapid formation of functional monolayers on silicon under mild conditions. Physical Chemistry Chemical Physics 2014, 16 (17), 8003-8011.
  9. Clarke, T. M.; Peet, J.; Lungenschmied, C.; Drolet, N.; Lu, X.; Ocko, B. M.; Mozer, A. J.; Loi, M. A., The role of emissive charge transfer states in two polymer-fullerene organic photovoltaic blends: Tuning charge photogeneration through the use of processing additives. Journal of Materials Chemistry A 2014, 2 (31), 12583-12593.
  10. Clarke, T. M.; Zhang, G.; Mozer, A. J., Active layer limitations and non-geminate recombination in polymer-fullerene bulk heterojunction solar cells. In RSC Energy and Environment Series, Conibeer, G.; Beard, M. C.; Nozik, A. J., Eds. Royal Society of Chemistry: 2014; Vol. 2014-January, pp 287-323.
  11. Cornock, R.; Beirne, S.; Thompson, B.; Wallace, G. G., Coaxial additive manufacture of biomaterial composite scaffolds for tissue engineering. Biofabrication 2014, 6 (2).
  12. Czichy, M.; Wagner, P.; Grza̧dziel, L.; Krzywiecki, M.; Szwajca, A.; Łapkowski, M.; Zak, J.; Officer, D. L., Electrochemical and photoelectronic studies on C60-pyrrolidine- functionalised poly(terthiophene). Electrochimica Acta 2014, 141, 51-60.
  13. Darwish, N.; Aragonès, A. C.; Darwish, T.; Ciampi, S.; Díez-Pérez, I., Multi-responsive photo- and chemo-electrical single-molecule switches. Nano Letters 2014, 14 (12), 7064-7070.
  14. De Silva, D. A.; Martens, P. J.; Gilmore, K. J.; Panhuis, M. I. H., Degradation behavior of ionic-covalent entanglement hydrogels. Journal of Applied Polymer Science 2014, 132 (1).
  15. Felimban, R.; Ye, K.; Traianedes, K.; Di Bella, C.; Crook, J.; Wallace, G. G.; Quigley, A.; Choong, P. F. M.; Myers, D. E., Differentiation of stem cells from human infrapatellar fat pad: Characterization of cells undergoing chondrogenesis. Tissue Engineering - Part A 2014, 20 (15-16), 2213-2223.
  16. Florea, L.; Wagner, K.; Wagner, P.; Wallace, G. G.; Benito-Lopez, F.; Officer, D. L.; Diamond, D., Photo-chemopropulsion-light-stimulated movement of microdroplets. Advanced Materials 2014, 26 (43), 7339-7345.
  17. Gambhir, S.; Murray, E.; Sayyar, S.; Wallace, G. G.; Officer, D. L., Anhydrous organic dispersions of highly reduced chemically converted graphene. Carbon 2014, 76, 368-377.
  18. Godino, N.; Vereshchagina, E.; Gorkin Iii, R.; Ducrée, J., Centrifugal automation of a triglyceride bioassay on a low-cost hybrid paper-polymer device. Microfluidics and Nanofluidics 2014, 16 (5), 895-905.
  19. Golovchanskiy, I. A.; Pan, A. V.; Fedoseev, S. A.; Higgins, M., Significant tunability of thin film functionalities enabled by manipulating magnetic and structural nano-domains. Applied Surface Science 2014, 311, 549-557.
  20. Gu, Q.; Hao, J.; Hai, T.; Wang, J.; Jia, Y.; Kong, Q.; Wang, J.; Feng, C.; Xue, B.; Xie, B.; Liu, S.; Li, J.; He, Y.; Sun, J.; Liu, L.; Wang, L.; Liu, Z.; Zhou, Q., Efficient generation of mouse ESCs-like pig induced pluripotent stem cells. Protein and Cell 2014, 5 (5), 338-342.
  21. Haines, C. S.; Lima, M. D.; Li, N.; Spinks, G. M.; Foroughi, J.; Madden, J. D. W.; Kim, S. H.; Fang, S.; De Andrade, M. J.; Göktepe, F.; Göktepe, Ö.; Mirvakili, S. M.; Naficy, S.; Lepró, X.; Oh, J.; Kozlov, M. E.; Kim, S. J.; Xu, X.; Swedlove, B. J.; Wallace, G. G.; Baughman, R. H., Artificial muscles from fishing line and sewing thread. Science 2014, 343 (6173), 868-872.
  22. Itik, M.; Sabetghadam, M.; Alici, G., Force control of a tri-layer conducting polymer actuator using optimized fuzzy logic control. Smart Materials and Structures 2014, 23 (12).
  23. Jalili, R.; Aboutalebi, S. H.; Esrafilzadeh, D.; Konstantinov, K.; Razal, J. M.; Moulton, S. E.; Wallace, G. G., Formation and processability of liquid crystalline dispersions of graphene oxide. Materials Horizons 2014, 1 (1), 87-91.
  24. Jamali, S. S.; Moulton, S. E.; Tallman, D. E.; Forsyth, M.; Weber, J.; Wallace, G. G., Applications of scanning electrochemical microscopy (SECM) for local characterization of AZ31 surface during corrosion in a buffered media. Corrosion Science 2014, 86, 93-100.
  25. Jia, X.; Yang, Y.; Wang, C.; Zhao, C.; Vijayaraghavan, R.; Macfarlane, D. R.; Forsyth, M.; Wallace, G. G., Biocompatible ionic liquid-biopolymer electrolyte-enabled thin and compact magnesium-Air batteries. ACS Applied Materials and Interfaces 2014, 6 (23), 21110-21117.
  26. Kang, H.; Park, H.; Park, Y.; Jung, M.; Kim, B. C.; Wallace, G.; Cho, G., Fully roll-to-roll gravure printable wireless (13.56 MHz) sensor-signage tags for smart packaging. Scientific Reports 2014, 4.
  27. Kar, M.; Simons, T. J.; Forsyth, M.; MacFarlane, D. R., Ionic liquid electrolytes as a platform for rechargeable metal-air batteries: A perspective. Physical Chemistry Chemical Physics 2014, 16 (35), 18658-18674.
  28. Kim, B. C.; Cho, W. J.; Lee, W. G.; Kim, S. J.; Jalili, R.; Park, S. Y.; Wallace, G. G.; Yu, K. H.; Chang, S. J., Capacitive behaviour of thermally reduced graphene oxide in a novel ionic liquid containing di-cationic charge. Synthetic Metals 2014, 193, 110-116.
  29. Kirchmajer, D. M.; Panhuis, M. I. H. In Biopolymer based tough and self-recovering ionic-covalent entanglement hydrogels, 2014 MRS Spring Meeting, Taioli, S., Ed. Materials Research Society: 2014.
  30. Kirchmajer, D. M.; Steinhoff, B.; Warren, H.; Clark, R.; In Het Panhuis, M., Enhanced gelation properties of purified gellan gum. Carbohydrate Research 2014, 388 (1), 125-129.
  31. Knittel, P.; Higgins, M. J.; Kranz, C., Nanoscopic polypyrrole AFM-SECM probes enabling force measurements under potential control. Nanoscale 2014, 6 (4), 2255-2260.
  32. Kwon, C. H.; Lee, S. H.; Choi, Y. B.; Lee, J. A.; Kim, S. H.; Kim, H. H.; Spinks, G. M.; Wallace, G. G.; Lima, M. D.; Kozlov, M. E.; Baughman, R. H.; Kim, S. J., High-power biofuel cell textiles from woven biscrolled carbon nanotube yarns. Nature Communications 2014, 5.
  33. Lawal, A. T.; Wallace, G. G., Vapour phase polymerisation of conducting and non-conducting polymers: A review. Talanta 2014, 119, 133-143.
  34. Lee, J. A.; Kim, Y. T.; Spinks, G. M.; Suh, D.; Lepró, X.; Lima, M. D.; Baughman, R. H.; Kim, S. J., All-solid-state carbon nanotube torsional and tensile artificial muscles. Nano Letters 2014, 14 (5), 2664-2669.
  35. Lin, J.; Heo, Y. U.; Nattestad, A.; Sun, Z.; Wang, L.; Kim, J. H.; Dou, S. X., 3D hierarchical rutile TiO2 and metal-free organic sensitizer producing dye-sensitized solar cells 8.6% conversion efficiency. Scientific Reports 2014, 4.
  36. Lin, J.; Nattestad, A.; Yu, H.; Bai, Y.; Wang, L.; Dou, S. X.; Kim, J. H., Highly connected hierarchical textured TiO2 spheres as photoanodes for dye-sensitized solar cells. Journal of Materials Chemistry A 2014, 2 (23), 8902-8909.
  37. Ma, J.; Wang, J.; He, Y. S.; Liao, X. Z.; Chen, J.; Wang, J. Z.; Yuan, T.; Ma, Z. F., A solvothermal strategy: One-step in situ synthesis of self-assembled 3D graphene-based composites with enhanced lithium storage capacity. Journal of Materials Chemistry A 2014, 2 (24), 9200-9207.
  38. Mingyan, W.; Wei, Z.; Dongen, Z.; Shuan, L.; Weixing, M.; Zhiwei, T.; Jun, C., CeO2 hollow nanospheres decorated reduced graphene oxide composite for efficient photocatalytic dye-degradation. Materials Letters 2014, 137, 229-232.
  39. Mirvakili, S. M.; Ravandi, A. R.; Hunter, I. W.; Haines, C. S.; Li, N.; Foroughi, J.; Naficy, S.; Spinks, G. M.; Baughman, R. H.; Madden, J. D. W. In Simple and strong: Twisted silver painted nylon artificial muscle actuated by Joule heating, Electroactive Polymer Actuators and Devices, EAPAD 2014, San Diego, CA, SPIE: San Diego, CA, 2014.
  40. Molino, P. J.; Yue, Z.; Zhang, B.; Tibbens, A.; Liu, X.; Kapsa, R. M. I.; Higgins, M. J.; Wallace, G. G., Influence of Biodopants on PEDOT Biomaterial Polymers: Using QCM-D to Characterize Polymer Interactions with Proteins and Living Cells. Advanced Materials Interfaces 2014, 1 (3).
  41. Monaghan, B. J.; Longbottom, R. J.; Reid, M.; Aladejebi, O. A.; Jayasekara, A. S.; Panhuis, M. In A new approach to investigating coke reactivity, Celebrating the Megascale: Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson - TMS 2014 143rd Annual Meeting and Exhibition, San Diego, CA, Minerals, Metals and Materials Society: San Diego, CA, 2014; pp 519-527.
  42. Moulton, S. E.; Wallace, G. G., 3-dimensional (3D) fabricated polymer based drug delivery systems. Journal of Controlled Release 2014, 193, 27-34.
  43. Naficy, S.; Jalili, R.; Aboutalebi, S. H.; Gorkin, R. A., III; Konstantinov, K.; Innis, P. C.; Spinks, G. M.; Poulin, P.; Wallace, G. G., Graphene oxide dispersions: Tuning rheology to enable fabrication. Materials Horizons 2014, 1 (3), 326-331.
  44. Naficy, S.; Spinks, G. M.; Wallace, G. G., Thin, tough, pH-sensitive hydrogel films with rapid load recovery. ACS Applied Materials and Interfaces 2014, 6(6), 4109-4114.
  45. Nattestad, A.; Cheng, Y. Y.; MacQueen, R. W.; Wallace, G. G.; Schmidt, T. W., Integrating a triplet-triplet annihilation up-conversion system to enhance dye-sensitized solar cell response to sub-bandgap light. Journal of Visualized Experiments 2014, (91).
  46. O'Connell, C. D.; Higgins, M. J.; Marusic, D.; Moulton, S. E.; Wallace, G. G., Liquid ink deposition from an atomic force microscope tip: Deposition monitoring and control of feature size. Langmuir 2014, 30 (10), 2712-2721.
  47. O'Connell, C. D.; Higgins, M. J.; Sullivan, R. P.; Moulton, S. E.; Wallace, G. G., Ink-on-probe hydrodynamics in atomic force microscope deposition of liquid inks. Small 2014, 10 (18), 3717-3728.
  48. Payne, M.; Wang, D.; Sinclair, C. M.; Kapsa, R. M. I.; Quigley, A. F.; Wallace, G. G.; Razal, J. M.; Baughman, R. H.; Münch, G.; Vallotton, P., Automated quantification of neurite outgrowth orientation distributions on patterned surfaces. Journal of Neural Engineering 2014, 11 (4).
  49. Qi, A.; Hoo, S. P.; Friend, J.; Yeo, L.; Yue, Z.; Chan, P. P. Y., Hydroxypropyl cellulose methacrylate as a photo-patternable and biodegradable hybrid paper substrate for cell culture and other bioapplications. Advanced Healthcare Materials 2014, 3 (4), 543-554.
  50. Rashid, M. H. O.; Pham, S. Q. T.; Sweetman, L. J.; Alcock, L. J.; Wise, A.; Nghiem, L. D.; Triani, G.; in het Panhuis, M.; Ralph, S. F., Synthesis, properties, water and solute permeability of MWNT buckypapers. Journal of Membrane Science 2014, 456, 175-184.
  51. Rösner, B.; Guldi, D. M.; Chen, J.; Minett, A. I.; Fink, R. H., Dispersion and characterization of arc discharge single-walled carbon nanotubes-towards conducting transparent films. Nanoscale 2014, 6 (7), 3695-3703.
  52. Ruhparwar, A.; Piontek, P.; Ungerer, M.; Ghodsizad, A.; Partovi, S.; Foroughi, J.; Szabo, G.; Farag, M.; Karck, M.; Spinks, G. M.; Kim, S. J., Electrically contractile polymers augment right ventricular output in the heart. Artificial Organs 2014, 38 (12), 1034-1039.
  53. Salari, M.; Aboutalebi, S. H.; Chidembo, A. T.; Innis, P. C.; Konstantinov, K.; Liu, H. K.; Schmuki, P., Design of self-assembled TiO2 architectures: Towards hybrid nanotubular interfaces. Physica Status Solidi (A) Applications and Materials Science 2014, 211 (4), 938-945.
  54. Sandron, S.; Heery, B.; Gupta, V.; Collins, D. A.; Nesterenko, E. P.; Nesterenko, P. N.; Talebi, M.; Beirne, S.; Thompson, F.; Wallace, G. G.; Regan, F.; Paull, B., 3D printed metal columns for capillary liquid chromatography. Analyst 2014, 139 (24), 6343-6347.
  55. Sangian, D.; Zheng, W.; Spinks, G. M., Optimization of the sequential polymerization synthesis method for polypyrrole films. Synthetic Metals 2014,189, 53-56.
  56. Sayyar, S.; Cornock, R.; Murray, E.; Beirne, S.; Officer, D. L.; Wallace, G. G., Extrusion printed graphene/ polycaprolactone/ composites for tissue engineering. In 15th International Conference on Advances in Materials and Processing Technologies, AMPT 2012, Wollongong, NSW, 2014; Vol. 773-774, pp 496-502.
  57. Seyedin, M. Z.; Razal, J. M.; Innis, P. C.; Wallace, G. G., Strain-responsive polyurethane/PEDOT:PSS elastomeric composite fibers with high electrical conductivity. Advanced Functional Materials 2014, 24 (20), 2957-2966.
  58. Sherrell, P. C.; Thompson, B. C.; Wassei, J. K.; Gelmi, A. A.; Higgins, M. J.; Kaner, R. B.; Wallace, G. G., Maintaining cytocompatibility of biopolymers through a graphene layer for electrical stimulation of nerve cells. Advanced Functional Materials 2014, 24 (6), 769-776.
  59. Shi, G.; Michelmore, A.; Jin, J.; Li, L. H.; Chen, Y.; Wang, L.; Yu, H.; Wallace, G.; Gambhir, S.; Zhu, S.; Hojati-Talemi, P.; Ma, J., Advancement in liquid exfoliation of graphite through simultaneously oxidizing and ultrasonicating. Journal of Materials Chemistry A 2014, 2 (47), 20382-20392.
  60. Shu, K.; Wang, C.; Wang, M.; Zhao, C.; Wallace, G. G., Graphene cryogel papers with enhanced mechanical strength for high performance lithium battery anodes. Journal of Materials Chemistry A 2014, 2 (5), 1325-1331.
  61. Simonov, A. N.; Grosse, W.; Mashkina, E. A.; Bethwaite, B.; Tan, J.; Abramson, D.; Wallace, G. G.; Moulton, S. E.; Bond, A. M., New insights into the analysis of the electrode kinetics of flavin adenine dinucleotide redox center of glucose oxidase immobilized on carbon electrodes. Langmuir 2014,30 (11), 3264-3273.
  62. Stamenkovic, A.; Munro, B. J.; Peoples, G. E., Physiological cross-sectional area of the oblique head of the adductor pollicis is greater than its transverse counterpart: Implications for functional testing. Muscle and Nerve 2014, 49 (3), 405-412.
  63. Vucaj, N.; Quinn, M. D. J.; Baechler, C.; Notley, S. M.; Cottis, P.; Hojati-Talemi, P.; Fabretto, M. V.; Wallace, G. G.; Murphy, P. J.; Evans, D. R., Vapor phase synthesis of conducting polymer nanocomposites incorporating 2D nanoparticles. Chemistry of Materials 2014, 26 (14), 4207-4213.
  64. Wang, M.; Huang, J.; Wang, M.; Zhang, D.; Chen, J., Electrochemical nonenzymatic sensor based on CoO decorated reduced graphene oxide for the simultaneous determination of carbofuran and carbaryl in fruits and vegetables. Food Chemistry 2014, 151, 191-197.
  65. Wang, M. Y.; Shen, T.; Wang, M.; Zhang, D. E.; Tong, Z. W.; Chen, J., One-pot synthesis of α-Fe 2 O 3 nanoparticles-decorated reduced graphene oxide for efficient nonenzymatic H 2 O 2 biosensor. Sensors and Actuators, B: Chemical 2014, 190, 645-650.
  66. Warren, H.; Gately, R. D.; O'Brien, P.; Gorkin, R.; In Het Panhuis, M., Electrical conductivity, impedance, and percolation behavior of carbon nanofiber and carbon nanotube containing gellan gum hydrogels. Journal of Polymer Science, Part B: Polymer Physics 2014, 52 (13), 864-871.
  67. Warren, H.; In Het Panhuis, M. In Electrical conductivity and impedance behaviour of hydrogels, Nanobiosystems: Processing, Characterization, and Applications VII, Kobayashi, N.; Ouchen, F.; Rau, I., Eds. SPIE: 2014.
  68. Weng, B.; Morrin, A.; Shepherd, R.; Crowley, K.; Killard, A. J.; Innis, P. C.; Wallace, G. G., Wholly printed polypyrrole nanoparticle-based biosensors on flexible substrate. Journal of Materials Chemistry B 2014, 2 (7), 793-799.
  69. Westmacott, K.; Weng, B.; Wallace, G. G.; Killard, A. J., Nanostructured conducting polymers for electrochemical sensing and biosensing. In Nanosensors for Chemical and Biological Applications: Sensing with Nanotubes, Nanowires and Nanoparticles, Elsevier Ltd.: 2014; pp 150-194.
  70. Wright, C. J.; Beirne, S. T.; Gorkin, R. A., III; Wallace, G. G. In Near field electroprinted hydrogel arrays for electrochemical sensing, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014, Chemical and Biological Microsystems Society: 2014; pp 2164-2166.
  71. Xin, H.; Brown, H. R.; Spinks, G. M., Erratum: Molecular weight distribution of network strands in double network hydrogels estimated by mechanical testing (Polymer (United Kingdom) (2014) 55 (3037-3044)). Polymer 2014, 55 (23), 6196.
  72. Xin, H.; Brown, H. R.; Spinks, G. M., Molecular weight distribution of network strands in double network hydrogels estimated by mechanical testing. Polymer 2014, 55 (13), 3037-3044.
  73. Xiong, J.; Li, Z.; Chen, J.; Zhang, S.; Wang, L.; Dou, S., Facile synthesis of highly efficient one-dimensional plasmonic photocatalysts through Ag@Cu2O core-shell heteronanowires. ACS Applied Materials and Interfaces 2014, 6 (18), 15716-15725.
  74. Xu, D.; Xu, Q.; Wang, K.; Chen, J.; Chen, Z., Fabrication of free-standing hierarchical carbon nanofiber/graphene oxide/polyaniline films for supercapacitors. ACS Applied Materials and Interfaces 2014, 6 (1), 200-209.
  75. Yang, H.; Wang, N.; Xu, Q.; Chen, Z.; Ren, Y.; Razal, J. M.; Chen, J., Fabrication of graphene foam supported carbon nanotube/polyaniline hybrids for high-performance supercapacitor applications. 2D Materials 2014, 1 (3).
  76. Yang, Y.; Wang, C.; Zhang, C.; Wang, D.; He, D.; Wallace, G. G., A novel codoping approach for enhancing the performance of polypyrrole cathode in a bioelectric battery. Carbon 2014, 80 (1), 691-697.
  77. Ye, K.; Felimban, R.; Traianedes, K.; Moulton, S. E.; Wallace, G. G.; Chung, J.; Quigley, A.; Choong, P. F. M.; Myers, D. E., Chondrogenesis of infrapatellar fat pad derived adipose stem cells in 3D printed chitosan scaffold. PLoS ONE 2014, 9 (6).
  78. Zhang, B. G. X.; Myers, D. E.; Wallace, G. G.; Brandt, M.; Choong, P. F. M., Bioactive coatings for orthopaedic implants-recent trends in development of implant coatings. International Journal of Molecular Sciences 2014, 15 (7), 11878-11921.
  79. Zhang, B. G. X.; Quigley, A. F.; Myers, D. E.; Wallace, G. G.; Kapsa, R. M. I.; Choong, P. F. M., Recent advances in nerve tissue engineering. International Journal of Artificial Organs 2014, 37 (4), 277-291.
  80. Zhao, C.; Wang, C.; Gorkin Iii, R.; Beirne, S.; Shu, K.; Wallace, G. G., Three dimensional (3D) printed electrodes for interdigitated supercapacitors. Electrochemistry Communications 2014, 41, 20-23.
  81. Zhao, L.; Wagner, P.; Elliott, A. B. S.; Griffith, M. J.; Clarke, T. M.; Gordon, K. C.; Mori, S.; Mozer, A. J., Enhanced performance of dye-sensitized solar cells using carbazole-substituted di-chromophoric porphyrin dyes. Journal of Materials Chemistry A 2014, 2 (40), 16963-16977.
  82. Zhu, Z.; Song, G.; Liu, J.; Whitten, P. G.; Liu, L.; Wang, H., Liquid crystalline behavior of graphene oxide in the formation and deformation of tough nanocomposite hydrogels. Langmuir 2014, 30 (48), 14648-14657.